Alpha Microsystems SCSI Spécifications télécharger pdf (Page 43)

Page J-2 AM-436-44 1.2GB and AM-436-45 540MB SCSI Drives

Maxtor MXT drives with 1.2 firmware can only be used in Series 90 applications. Maxtor

MXT drives with special 6F+ firmware can only be used in Roadrunner and AM-190

applications. MXT drives that include 6F+ firmware will have a sticker affixed to the rear

of the drive indicating the firmware revision. Maxtor MXT drives with 1.5 (or later)

firmware can be used on all Alpha Micro Series 90 and AMOS applications that support

SCSI disk drives. Maxtor’s 1.5 (or later) version of the firmware supersedes all previous

versions of the firmware, including 1.2 and 6F+.

SCSI disk drives used in AMOS 680X0 based computers must be installed with the

drive’s signal ground isolated from the computer’s chassis ground. Before installing

your new disk drive, see Section 10 (in this document) dealing with drive isolation in

AMOS based products.

PDI-00436-20, Rev. A15

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 52 53

Pas de commentaire

Alpha Microsystems SCSI Spécifications Page 43